/**
******************************************************************************
* @file stm32h7xx_hal_pwr.h
* @author MCD Application Team
* @brief Header file of PWR HAL module.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7xx_HAL_PWR_H
#define STM32H7xx_HAL_PWR_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal_def.h"
/** @addtogroup STM32H7xx_HAL_Driver
* @{
*/
/** @addtogroup PWR
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup PWR_Exported_Types PWR Exported Types
* @{
*/
/**
* @brief PWR PVD configuration structure definition
*/
typedef struct
{
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. This
parameter can be a value of @ref
PWR_PVD_detection_level.
*/
uint32_t Mode; /*!< Mode: Specifies the EXTI operating mode for the PVD
event. This parameter can be a value of @ref
PWR_PVD_Mode.
*/
}PWR_PVDTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWR_Exported_Constants PWR Exported Constants
* @{
*/
/** @defgroup PWR_PVD_detection_level PWR PVD detection level
* @{
*/
#define PWR_PVDLEVEL_0 PWR_CR1_PLS_LEV0 /*!< Programmable voltage detector
level 0 selection : 1V95 */
#define PWR_PVDLEVEL_1 PWR_CR1_PLS_LEV1 /*!< Programmable voltage detector
level 1 selection : 2V1 */
#define PWR_PVDLEVEL_2 PWR_CR1_PLS_LEV2 /*!< Programmable voltage detector
level 2 selection : 2V25 */
#define PWR_PVDLEVEL_3 PWR_CR1_PLS_LEV3 /*!< Programmable voltage detector
level 3 selection : 2V4 */
#define PWR_PVDLEVEL_4 PWR_CR1_PLS_LEV4 /*!< Programmable voltage detector
level 4 selection : 2V55 */
#define PWR_PVDLEVEL_5 PWR_CR1_PLS_LEV5 /*!< Programmable voltage detector
level 5 selection : 2V7 */
#define PWR_PVDLEVEL_6 PWR_CR1_PLS_LEV6 /*!< Programmable voltage detector
level 6 selection : 2V85 */
#define PWR_PVDLEVEL_7 PWR_CR1_PLS_LEV7 /*!< External input analog voltage
(Compare internally to VREF) */
/**
* @}
*/
/** @defgroup PWR_PVD_Mode PWR PVD Mode
* @{
*/
#define PWR_PVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */
#define PWR_PVD_MODE_IT_RISING (0x00010001U) /*!< Interrupt Mode with Rising edge trigger detection */
#define PWR_PVD_MODE_IT_FALLING (0x00010002U) /*!< Interrupt Mode with Falling edge trigger detection */
#define PWR_PVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< Interrupt Mode with Rising/Falling edge trigger detection */
#define PWR_PVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */
#define PWR_PVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */
#define PWR_PVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
* @{
*/
#define PWR_MAINREGULATOR_ON (0U)
#define PWR_LOWPOWERREGULATOR_ON PWR_CR1_LPDS
/**
* @}
*/
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
* @{
*/
#define PWR_SLEEPENTRY_WFI (0x01U)
#define PWR_SLEEPENTRY_WFE (0x02U)
/**
* @}
*/
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
* @{
*/
#define PWR_STOPENTRY_WFI (0x01U)
#define PWR_STOPENTRY_WFE (0x02U)
/**
* @}
*/
/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
* @{
*/
#if defined(PWR_SRDCR_VOS)
#define PWR_REGULATOR_VOLTAGE_SCALE0 (PWR_SRDCR_VOS_1 | PWR_SRDCR_VOS_0)
#define PWR_REGULATOR_VOLTAGE_SCALE1 (PWR_SRDCR_VOS_1)
#define PWR_REGULATOR_VOLTAGE_SCALE2 (PWR_SRDCR_VOS_0)
#define PWR_REGULATOR_VOLTAGE_SCALE3 (0U)
#else
#define PWR_REGULATOR_VOLTAGE_SCALE0 (0U)
#define PWR_REGULATOR_VOLTAGE_SCALE1 (PWR_D3CR_VOS_1 | PWR_D3CR_VOS_0)
#define PWR_REGULATOR_VOLTAGE_SCALE2 (PWR_D3CR_VOS_1)
#define PWR_REGULATOR_VOLTAGE_SCALE3 (PWR_D3CR_VOS_0)
#endif /* PWR_SRDCR_VOS */
/**
* @}
*/
/** @defgroup PWR_Flag PWR Flag
* @{
*/
/* PWR CPU flag */
#define PWR_FLAG_STOP (0x01U)
#if defined (PWR_CPUCR_SBF_D2)
#define PWR_FLAG_SB_D1 (0x02U)
#define PWR_FLAG_SB_D2 (0x03U)
#endif /* defined (PWR_CPUCR_SBF_D2) */
#define PWR_FLAG_SB (0x04U)
#if defined (DUAL_CORE)
#define PWR_FLAG_CPU_HOLD (0x05U)
#define PWR_FLAG_CPU2_HOLD (0x06U)
#define PWR_FLAG2_STOP (0x07U)
#define PWR_FLAG2_SB_D1 (0x08U)
#define PWR_FLAG2_SB_D2 (0x09U)
#define PWR_FLAG2_SB (0x0AU)
#endif /* defined (DUAL_CORE) */
#define PWR_FLAG_PVDO (0x0BU)
#define PWR_FLAG_AVDO (0x0CU)
#define PWR_FLAG_ACTVOSRDY (0x0DU)
#define PWR_FLAG_ACTVOS (0x0EU)
#define PWR_FLAG_BRR (0x0FU)
#define PWR_FLAG_VOSRDY (0x10U)
#if defined (SMPS)
#define PWR_FLAG_SMPSEXTRDY (0x11U)
#else
#define PWR_FLAG_SCUEN (0x11U)
#endif /* defined (SMPS) */
#if defined (PWR_CSR1_MMCVDO)
#define PWR_FLAG_MMCVDO (0x12U)
#endif /* defined (PWR_CSR1_MMCVDO) */
#define PWR_FLAG_USB33RDY (0x13U)
#define PWR_FLAG_TEMPH (0x14U)
#define PWR_FLAG_TEMPL (0x15U)
#define PWR_FLAG_VBATH (0x16U)
#define PWR_FLAG_VBATL (0x17U)
/* PWR Wake up flag */
#define PWR_FLAG_WKUP1 PWR_WKUPCR_WKUPC1
#define PWR_FLAG_WKUP2 PWR_WKUPCR_WKUPC2
#define PWR_FLAG_WKUP3 PWR_WKUPCR_WKUPC3
#define PWR_FLAG_WKUP4 PWR_WKUPCR_WKUPC4
#define PWR_FLAG_WKUP5 PWR_WKUPCR_WKUPC5
#define PWR_FLAG_WKUP6 PWR_WKUPCR_WKUPC6
/**
* @}
*/
/** @defgroup PWR_ENABLE_WUP_Mask PWR Enable WUP Mask
* @{
*/
#define PWR_EWUP_MASK (0x0FFF3F3FU)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup PWR_Exported_Macro PWR Exported Macro
* @{
*/
/** @brief Configure the main internal regulator output voltage.
* @param __REGULATOR__ : Specifies the regulator output voltage to achieve a
* trade-off between performance and power consumption
* when the device does not operate at the maximum
* frequency (refer to the datasheet for more details).
* This parameter can be one of the following values:
* @arg PWR_REGULATOR_VOLTAGE_SCALE0 : Regulator voltage output
* Scale 0 mode.
* @arg PWR_REGULATOR_VOLTAGE_SCALE1 : Regulator voltage output
* Scale 1 mode.
* @arg PWR_REGULATOR_VOLTAGE_SCALE2 : Regulator voltage output
* Scale 2 mode.
* @arg PWR_REGULATOR_VOLTAGE_SCALE3 : Regulator voltage output
* Scale 3 mode.
* @note For STM32H74x and STM32H75x lines, configuring Voltage Scale 0 is
* only possible when Vcore is supplied from LDO (Low DropOut). The
* SYSCFG Clock must be enabled through __HAL_RCC_SYSCFG_CLK_ENABLE()
* macro before configuring Voltage Scale 0 using
* __HAL_PWR_VOLTAGESCALING_CONFIG().
* Transition to Voltage Scale 0 is only possible when the system is
* already in Voltage Scale 1.
* Transition from Voltage Scale 0 is only possible to Voltage Scale 1
* then once in Voltage Scale 1 it is possible to switch to another
* voltage scale.
* After each regulator voltage setting, wait on VOSRDY flag to be set
* using macro __HAL_PWR_GET_FLAG().
* To enter low power mode , and if current regulator voltage is
* Voltage Scale 0 then first switch to Voltage Scale 1 before entering
* low power mode.
* @retval None.
*/
#if defined (PWR_SRDCR_VOS) /* STM32H7Axxx and STM32H7Bxxx lines */
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \
do { \
__IO uint32_t tmpreg = 0x00; \
/* Configure the Voltage Scaling */ \
MODIFY_REG(PWR->SRDCR, PWR_SRDCR_VOS, (__REGULATOR__)); \
/* Delay after setting the voltage scaling */ \
tmpreg = READ_BIT(PWR->SRDCR, PWR_SRDCR_VOS); \
UNUSED(tmpreg); \
} while(0)
#else /* 3 power domains devices */
#if defined(SYSCFG_PWRCR_ODEN) /* STM32H74xxx and STM32H75xxx lines */
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \
do { \
__IO uint32_t tmpreg = 0x00; \
/* Check the voltage scaling to be configured */ \
if((__REGULATOR__) == PWR_REGULATOR_VOLTAGE_SCALE0) \
{ \
/* Configure the Voltage Scaling 1 */ \
MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, PWR_REGULATOR_VOLTAGE_SCALE1); \
/* Delay after setting the voltage scaling */ \
tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \
/* Enable the PWR overdrive */ \
SET_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \
/* Delay after setting the syscfg boost setting */ \
tmpreg = READ_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \
} \
else \
{ \
/* Disable the PWR overdrive */ \
CLEAR_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \
/* Delay after setting the syscfg boost setting */ \
tmpreg = READ_BIT(SYSCFG->PWRCR, SYSCFG_PWRCR_ODEN); \
/* Configure the Voltage Scaling x */ \
MODIFY_REG(PWR->D3CR, PWR_D3CR_VOS, (__REGULATOR__)); \
/* Delay after setting the voltage scaling */ \
tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \
} \
UNUSED(tmpreg); \
} while(0)
#else /* STM32H72xxx and STM32H73xxx lines */
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) \
do { \
__IO uint32_t tmpreg = 0x00; \
/* Configure the Voltage Scaling */ \
MODIFY_REG (PWR->D3CR, PWR_D3CR_VOS, (__REGULATOR__)); \
/* Delay after setting the voltage scaling */ \
tmpreg = READ_BIT(PWR->D3CR, PWR_D3CR_VOS); \
UNUSED(tmpreg); \
} while(0)
#endif /* defined(SYSCFG_PWRCR_ODEN) */
#endif /* defined (PWR_SRDCR_VOS) */
/** @brief Check PWR flags are set or not.
* @param __FLAG__ : Specifies the flag to check.
* This parameter can be one of the following values:
* @arg PWR_FLAG_PVDO : PVD Output. This flag is valid only if PVD
* is enabled by the HAL_PWR_EnablePVD()
* function.
* The PVD is stopped by STANDBY mode. For this
* reason, this bit is equal to 0 after STANDBY
* or reset until the PVDE bit is set.
* @arg PWR_FLAG_AVDO : AVD Output. This flag is valid only if AVD
* is enabled by the HAL_PWREx_EnableAVD()
* function. The AVD is stopped by STANDBY mode.
* For this reason, this bit is equal to 0
* after STANDBY or reset until the AVDE bit
* is set.
* @arg PWR_FLAG_ACTVOSRDY : This flag indicates that the Regulator
* voltage scaling output selection is
* ready.
* @arg PWR_FLAG_BRR : Backup regulator ready flag. This bit is not
* reset when the device wakes up from STANDBY
* mode or by a system reset or power-on reset.
* @arg PWR_FLAG_VOSRDY : This flag indicates that the Regulator
* voltage scaling output selection is ready.
* mode or by a system reset or power-on reset.
* @arg PWR_FLAG_USB33RDY : This flag indicates that the USB supply
* from regulator is ready.
* @arg PWR_FLAG_TEMPH : This flag indicates that the temperature
* equal or above high threshold level.
* @arg PWR_FLAG_TEMPL : This flag indicates that the temperature
* equal or below low threshold level.
* @arg PWR_FLAG_VBATH : This flag indicates that VBAT level equal
* or above high threshold level.
* @arg PWR_FLAG_VBATL : This flag indicates that VBAT level equal
* or below low threshold level.
* @arg PWR_FLAG_STOP : This flag indicates that the system entered
* in STOP mode.
* @arg PWR_FLAG_SB : This flag indicates that the system entered in
* STANDBY mode.
* @arg PWR_FLAG_SB_D1 : This flag indicates that the D1 domain
* entered in STANDBY mode.
* @arg PWR_FLAG_SB_D2 : This flag indicates that the D2 domain
* entered in STANDBY mode.
* @arg PWR_FLAG2_STOP : This flag indicates that the system entered
* in STOP mode.
* @arg PWR_FLAG2_SB : This flag indicates that the system entered
* in STANDBY mode.
* @arg PWR_FLAG2_SB_D1 : This flag indicates that the D1 domain
* entered in STANDBY mode.
* @arg PWR_FLAG2_SB_D2 : This flag indicates that the D2 domain
* entered in STANDBY mode.
* @arg PWR_FLAG_CPU_HOLD : This flag indicates that the CPU1 wakes
* up with hold.
* @arg PWR_FLAG_CPU2_HOLD : This flag indicates that the CPU2 wakes
* up with hold.
* @arg PWR_FLAG_SMPSEXTRDY : This flag indicates that the SMPS
* External supply is sready.
* @arg PWR_FLAG_SCUEN : This flag indicates that the supply
* configuration update is enabled.
* @arg PWR_FLAG_MMCVDO : This flag indicates that the VDDMMC is
* above or equal to 1.2 V.
* @note The PWR_FLAG_PVDO, PWR_FLAG_AVDO, PWR_FLAG_ACTVOSRDY, PWR_FLAG_BRR,
* PWR_FLAG_VOSRDY, PWR_FLAG_USB33RDY, PWR_FLAG_TEMPH, PWR_FLAG_TEMPL,
* PWR_FLAG_VBATH, PWR_FLAG_VBATL, PWR_FLAG_STOP and PWR_FLAG_SB flags
* are used for all H7 family lines.
* The PWR_FLAG2_STOP, PWR_FLAG2_SB, PWR_FLAG2_SB_D1, PWR_FLAG2_SB_D2,
* PWR_FLAG_CPU_HOLD and PWR_FLAG_CPU2_HOLD flags are used only for H7
* dual core lines.
* The PWR_FLAG_SB_D1 and PWR_FLAG_SB_D2 flags are used for all H7
* family except STM32H7Axxx and STM32H7Bxxx lines.
* The PWR_FLAG_MMCVDO flag is used only for STM32H7Axxx and
* STM32H7Bxxx lines.
* The PWR_FLAG_SCUEN flag is used for devices that support only LDO
* regulator.
* The PWR_FLAG_SMPSEXTRDY flag is used for devices that support LDO
* and SMPS regulators.
* @retval The (__FLAG__) state (TRUE or FALSE).
*/
#if defined (DUAL_CORE) /* Dual core lines */
#define __HAL_PWR_GET_FLAG(__FLAG__) \
(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\
((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\
((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\
((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\
((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_CR3_SMPSEXTRDY) == PWR_CR3_SMPSEXTRDY) :\
((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\
((__FLAG__) == PWR_FLAG_CPU_HOLD) ? ((PWR->CPU2CR & PWR_CPU2CR_HOLD1F) == PWR_CPU2CR_HOLD1F) :\
((__FLAG__) == PWR_FLAG_CPU2_HOLD) ? ((PWR->CPUCR & PWR_CPUCR_HOLD2F) == PWR_CPUCR_HOLD2F) :\
((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\
((__FLAG__) == PWR_FLAG2_SB) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF) == PWR_CPU2CR_SBF) :\
((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\
((__FLAG__) == PWR_FLAG2_STOP) ? ((PWR->CPU2CR & PWR_CPU2CR_STOPF) == PWR_CPU2CR_STOPF) :\
((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\
((__FLAG__) == PWR_FLAG2_SB_D1) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF_D1) == PWR_CPU2CR_SBF_D1) :\
((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\
((__FLAG__) == PWR_FLAG2_SB_D2) ? ((PWR->CPU2CR & PWR_CPU2CR_SBF_D2) == PWR_CPU2CR_SBF_D2) :\
((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\
((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\
((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\
((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\
((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL))
#else /* Single core lines */
#if defined (PWR_CPUCR_SBF_D2) /* STM32H72x, STM32H73x, STM32H74x and STM32H75x lines */
#if defined (SMPS) /* STM32H725 and STM32H735 lines */
#define __HAL_PWR_GET_FLAG(__FLAG__) \
(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\
((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\
((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\
((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\
((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_FLAG_SMPSEXTRDY) == PWR_FLAG_SMPSEXTRDY) :\
((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\
((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\
((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\
((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\
((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\
((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\
((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\
((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\
((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\
((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL))
#else /* STM32H723, STM32H733, STM32H742, STM32H743, STM32H750 and STM32H753 lines */
#define __HAL_PWR_GET_FLAG(__FLAG__) \
(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\
((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\
((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\
((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->D3CR & PWR_D3CR_VOSRDY) == PWR_D3CR_VOSRDY) :\
((__FLAG__) == PWR_FLAG_SCUEN) ? ((PWR->CR3 & PWR_CR3_SCUEN) == PWR_CR3_SCUEN) :\
((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\
((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\
((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\
((__FLAG__) == PWR_FLAG_SB_D1) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D1) == PWR_CPUCR_SBF_D1) :\
((__FLAG__) == PWR_FLAG_SB_D2) ? ((PWR->CPUCR & PWR_CPUCR_SBF_D2) == PWR_CPUCR_SBF_D2) :\
((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\
((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\
((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\
((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\
((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL))
#endif /* defined (SMPS) */
#else /* STM32H7Axxx and STM32H7Bxxx lines */
#if defined (SMPS) /* STM32H7AxxQ and STM32H7BxxQ lines */
#define __HAL_PWR_GET_FLAG(__FLAG__) \
(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\
((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\
((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\
((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\
((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->SRDCR & PWR_SRDCR_VOSRDY) == PWR_SRDCR_VOSRDY) :\
((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\
((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\
((__FLAG__) == PWR_FLAG_MMCVDO) ? ((PWR->CSR1 & PWR_CSR1_MMCVDO) == PWR_CSR1_MMCVDO) :\
((__FLAG__) == PWR_FLAG_SMPSEXTRDY) ? ((PWR->CR3 & PWR_CR3_SMPSEXTRDY) == PWR_CR3_SMPSEXTRDY) :\
((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\
((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\
((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\
((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\
((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL))
#else /* STM32H7Axx and STM32H7Bxx lines */
#define __HAL_PWR_GET_FLAG(__FLAG__) \
(((__FLAG__) == PWR_FLAG_PVDO) ? ((PWR->CSR1 & PWR_CSR1_PVDO) == PWR_CSR1_PVDO) :\
((__FLAG__) == PWR_FLAG_AVDO) ? ((PWR->CSR1 & PWR_CSR1_AVDO) == PWR_CSR1_AVDO) :\
((__FLAG__) == PWR_FLAG_ACTVOSRDY) ? ((PWR->CSR1 & PWR_CSR1_ACTVOSRDY) == PWR_CSR1_ACTVOSRDY) :\
((__FLAG__) == PWR_FLAG_BRR) ? ((PWR->CR2 & PWR_CR2_BRRDY) == PWR_CR2_BRRDY) :\
((__FLAG__) == PWR_FLAG_VOSRDY) ? ((PWR->SRDCR & PWR_SRDCR_VOSRDY) == PWR_SRDCR_VOSRDY) :\
((__FLAG__) == PWR_FLAG_SCUEN) ? ((PWR->CR3 & PWR_CR3_SCUEN) == PWR_CR3_SCUEN) :\
((__FLAG__) == PWR_FLAG_STOP) ? ((PWR->CPUCR & PWR_CPUCR_STOPF) == PWR_CPUCR_STOPF) :\
((__FLAG__) == PWR_FLAG_SB) ? ((PWR->CPUCR & PWR_CPUCR_SBF) == PWR_CPUCR_SBF) :\
((__FLAG__) == PWR_FLAG_MMCVDO) ? ((PWR->CSR1 & PWR_CSR1_MMCVDO) == PWR_CSR1_MMCVDO) :\
((__FLAG__) == PWR_FLAG_USB33RDY) ? ((PWR->CR3 & PWR_CR3_USB33RDY) == PWR_CR3_USB33RDY) :\
((__FLAG__) == PWR_FLAG_TEMPH) ? ((PWR->CR2 & PWR_CR2_TEMPH) == PWR_CR2_TEMPH) :\
((__FLAG__) == PWR_FLAG_TEMPL) ? ((PWR->CR2 & PWR_CR2_TEMPL) == PWR_CR2_TEMPL) :\
((__FLAG__) == PWR_FLAG_VBATH) ? ((PWR->CR2 & PWR_CR2_VBATH) == PWR_CR2_VBATH) :\
((PWR->CR2 & PWR_CR2_VBATL) == PWR_CR2_VBATL))
#endif /* SMPS */
#endif /* PWR_CPUCR_SBF_D2 */
#endif /* DUAL_CORE */
/** @brief Check PWR wake up flags are set or not.
* @param __FLAG__: specifies the wake up flag to check.
* This parameter can be one of the following values:
* @arg PWR_FLAG_WKUP1 : This parameter clear Wake up line 1 flag.
* @arg PWR_FLAG_WKUP2 : This parameter clear Wake up line 2 flag.
* @arg PWR_FLAG_WKUP3 : This parameter clear Wake up line 3 flag.
* @arg PWR_FLAG_WKUP4 : This parameter clear Wake up line 4 flag.
* @arg PWR_FLAG_WKUP5 : This parameter clear Wake up line 5 flag.
* @arg PWR_FLAG_WKUP6 : This parameter clear Wake up line 6 flag.
* @note The PWR_FLAG_WKUP3 and PWR_FLAG_WKUP5 are available only for devices
* that support GPIOI port.
* @retval The (__FLAG__) state (TRUE or FALSE).
*/
#define __HAL_PWR_GET_WAKEUPFLAG(__FLAG__) ((PWR->WKUPFR & (__FLAG__)) ? 0 : 1)
#if defined (DUAL_CORE)
/** @brief Clear CPU PWR flags.
* @param __FLAG__ : Specifies the flag to clear.
* @note This parameter is not used for the STM32H7 family and is kept as
* parameter just to maintain compatibility with other families.
* @note This macro clear all CPU flags STOPF, SBF, SBF_D1, and SBF_D2.
* This parameter can be one of the following values :
* @arg PWR_CPU_FLAGS : Clear HOLD2F, STOPF, SBF, SBF_D1, and SBF_D2
* CPU flags.
* @retval None.
*/
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) \
do { \
SET_BIT(PWR->CPUCR, PWR_CPUCR_CSSF); \
SET_BIT(PWR->CPU2CR, PWR_CPU2CR_CSSF); \
} while(0)
#else
/** @brief Clear CPU PWR flags.
* @param __FLAG__ : Specifies the flag to clear.
* @note This parameter is not used for the STM32H7 family and is kept as
* parameter just to maintain compatibility with other families.
* @note This macro clear all CPU flags.
* For single core devices except STM32H7Axxx and STM32H7Bxxx, CPU
* flags are STOPF, SBF, SBF_D1 and SBF_D2.
* For STM32H7Axxx and STM32H7Bxxx lines, CPU flags are STOPF and SBF.
* @retval None.
*/
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CPUCR, PWR_CPUCR_CSSF)
#endif /* defined (DUAL_CORE) */
/** @brief Clear PWR wake up flags.
* @param __FLAG__ : Specifies the wake up flag to be cleared.
* This parameter can be one of the following values :
* @arg PWR_FLAG_WKUP1 : This parameter clear Wake up line 1 flag.
* @arg PWR_FLAG_WKUP2 : This parameter clear Wake up line 2 flag.
* @arg PWR_FLAG_WKUP3 : This parameter clear Wake up line 3 flag.
* @arg PWR_FLAG_WKUP4 : This parameter clear Wake up line 4 flag.
* @arg PWR_FLAG_WKUP5 : This parameter clear Wake up line 5 flag.
* @arg PWR_FLAG_WKUP6 : This parameter clear Wake up line 6 flag.
* @note The PWR_FLAG_WKUP3 and PWR_FLAG_WKUP5 are available only for devices
* that support GPIOI port.
* @retval None.
*/
#define __HAL_PWR_CLEAR_WAKEUPFLAG(__FLAG__) SET_BIT(PWR->WKUPCR, (__FLAG__))
/**
* @brief Enable the PVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD)
#if defined (DUAL_CORE)
/**
* @brief Enable the PVD EXTI D2 Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTID2_ENABLE_IT() SET_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_PVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Disable the PVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD)
#if defined (DUAL_CORE)
/**
* @brief Disable the PVD EXTI D2 Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTID2_DISABLE_IT() CLEAR_BIT(EXTI_D2->IMR1, PWR_EXTI_LINE_PVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Enable event on PVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EXTI_LINE_PVD)
#if defined (DUAL_CORE)
/**
* @brief Enable event on PVD EXTI D2 Line.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTID2_ENABLE_EVENT() SET_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_PVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Disable event on PVD EXTI Line 16.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EXTI_LINE_PVD)
#if defined (DUAL_CORE)
/**
* @brief Disable event on PVD EXTI D2 Line.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTID2_DISABLE_EVENT() CLEAR_BIT(EXTI_D2->EMR1, PWR_EXTI_LINE_PVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Enable the PVD Rising Interrupt Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Disable the PVD Rising Interrupt Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Enable the PVD Falling Interrupt Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Disable the PVD Falling Interrupt Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD)
/**
* @brief Enable the PVD Rising & Falling Interrupt Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \
} while(0);
/**
* @brief Disable the PVD Rising & Falling Interrupt Trigger.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \
do { \
__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \
} while(0);
/**
* @brief Check whether the specified PVD EXTI interrupt flag is set or not.
* @retval EXTI PVD Line Status.
*/
#define __HAL_PWR_PVD_EXTI_GET_FLAG() ((READ_BIT(EXTI->PR1, PWR_EXTI_LINE_PVD) == PWR_EXTI_LINE_PVD) ? 1UL : 0UL)
#if defined (DUAL_CORE)
/**
* @brief Checks whether the specified PVD EXTI interrupt flag is set or not.
* @retval EXTI D2 PVD Line Status.
*/
#define __HAL_PWR_PVD_EXTID2_GET_FLAG() ((READ_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_PVD) == PWR_EXTI_LINE_PVD) ? 1UL : 0UL)
#endif /* defined (DUAL_CORE) */
/**
* @brief Clear the PVD EXTI flag.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() SET_BIT(EXTI->PR1, PWR_EXTI_LINE_PVD)
#if defined (DUAL_CORE)
/**
* @brief Clear the PVD EXTI D2 flag.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTID2_CLEAR_FLAG() SET_BIT(EXTI_D2->PR1, PWR_EXTI_LINE_PVD)
#endif /* defined (DUAL_CORE) */
/**
* @brief Generates a Software interrupt on PVD EXTI line.
* @retval None.
*/
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD)
/**
* @}
*/
/* Include PWR HAL Extension module */
#include "stm32h7xx_hal_pwr_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup PWR_Exported_Functions PWR Exported Functions
* @{
*/
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and De-Initialization Functions
* @{
*/
/* Initialization and de-initialization functions *****************************/
void HAL_PWR_DeInit (void);
void HAL_PWR_EnableBkUpAccess (void);
void HAL_PWR_DisableBkUpAccess (void);
/**
* @}
*/
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control Functions
* @{
*/
/* Peripheral Control functions **********************************************/
/* PVD configuration */
void HAL_PWR_ConfigPVD (PWR_PVDTypeDef *sConfigPVD);
void HAL_PWR_EnablePVD (void);
void HAL_PWR_DisablePVD (void);
/* WakeUp pins configuration */
void HAL_PWR_EnableWakeUpPin (uint32_t WakeUpPinPolarity);
void HAL_PWR_DisableWakeUpPin (uint32_t WakeUpPinx);
/* Low Power modes entry */
void HAL_PWR_EnterSTOPMode (uint32_t Regulator, uint8_t STOPEntry);
void HAL_PWR_EnterSLEEPMode (uint32_t Regulator, uint8_t SLEEPEntry);
void HAL_PWR_EnterSTANDBYMode (void);
/* Power PVD IRQ Handler */
void HAL_PWR_PVD_IRQHandler (void);
void HAL_PWR_PVDCallback (void);
/* Cortex System Control functions *******************************************/
void HAL_PWR_EnableSleepOnExit (void);
void HAL_PWR_DisableSleepOnExit (void);
void HAL_PWR_EnableSEVOnPend (void);
void HAL_PWR_DisableSEVOnPend (void);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup PWR_Private_Constants PWR Private Constants
* @{
*/
/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
* @{
*/
#define PWR_EXTI_LINE_PVD EXTI_IMR1_IM16 /*!< External interrupt line 16
Connected to the PVD EXTI Line */
/**
* @}
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup PWR_Private_Macros PWR Private Macros
* @{
*/
/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
* @{
*/
/* Check PVD level parameter */
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) ||\
((LEVEL) == PWR_PVDLEVEL_1) ||\
((LEVEL) == PWR_PVDLEVEL_2) ||\
((LEVEL) == PWR_PVDLEVEL_3) ||\
((LEVEL) == PWR_PVDLEVEL_4) ||\
((LEVEL) == PWR_PVDLEVEL_5) ||\
((LEVEL) == PWR_PVDLEVEL_6) ||\
((LEVEL) == PWR_PVDLEVEL_7))
/* Check PVD mode parameter */
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING) ||\
((MODE) == PWR_PVD_MODE_IT_FALLING) ||\
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) ||\
((MODE) == PWR_PVD_MODE_EVENT_RISING) ||\
((MODE) == PWR_PVD_MODE_EVENT_FALLING) ||\
((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) ||\
((MODE) == PWR_PVD_MODE_NORMAL))
/* Check low power regulator parameter */
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) ||\
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
/* Check low power mode entry parameter */
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) ||\
((ENTRY) == PWR_SLEEPENTRY_WFE))
/* Check low power mode entry parameter */
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) ||\
((ENTRY) == PWR_STOPENTRY_WFE))
/* Check voltage scale level parameter */
#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE0) || \
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* STM32H7xx_HAL_PWR_H */