Главная Обзор Помощь
Регистрация Вход
jduchniewicz
/
doom_riscv
Следить 1
В избранное 0
Ответвить 0
Файлы Обсуждения 0 Запросы на слияние 0 Вики
Дерево: 03fbd5a395
Ветки Метки
doom_riscv
/
projects
/
riscv_usb
Jakub Duchniewicz 03fbd5a395 Approach fixing the overlapped mailbox registers with code and bootloader. недель назад: 2
..
data bc60e00b90 Port 3signal code and integrate to the top module. недель назад: 3
fw 03fbd5a395 Approach fixing the overlapped mailbox registers with code and bootloader. недель назад: 2
rtl 03fbd5a395 Approach fixing the overlapped mailbox registers with code and bootloader. недель назад: 2
sim f560755b26 projects/riscv_usb: Add support for the user button 4 лет назад
Makefile c44a5464d7 Add mailbox for RTL/SW communication. недель назад: 3
README.md fd6a09e0c2 projects/riscv_usb: Fixup the README 1 год назад

README.md

RISC-V + USB core demo

For the icebreaker, the hardware connections are :

  • P1B4: USB DP
  • P1B3: USB DN
  • P1B2: Pull up. Resistor of 1.5 kOhm to USB DP

To run :

  • Build and flash the bitstream

    • This will build fw/boot.hex and include it as the BRAM initial data

  • Flash the main application code in SPI at offset 1M

    • make -C fw prog

  • Connect to the iCEBreaker uart console (ttyUSB1) with a 1M baudrate

    • and then at the Command> prompt, press c for 'connect'. This will start the USB detection and device should enumerate