Home Verkennen Help
Registreren Inloggen
jduchniewicz
/
doom_riscv
Volgen 1
Ster 0
Vork 0
Bestanden Kwesties 0 Pull-aanvragen 0 Wiki
Boom: 20b5151657
Aftakkingen Labels
doom_riscv
/
projects
/
riscv_usb
Jakub Duchniewicz 20b5151657 Increase the internal registers to 32 bits for WB compatibility. 3 weken geleden
..
data bc60e00b90 Port 3signal code and integrate to the top module. 3 weken geleden
fw 888981826f Transition to riscv_usb as base for out project. 3 weken geleden
rtl 20b5151657 Increase the internal registers to 32 bits for WB compatibility. 3 weken geleden
sim f560755b26 projects/riscv_usb: Add support for the user button 4 jaren geleden
Makefile c44a5464d7 Add mailbox for RTL/SW communication. 3 weken geleden
README.md fd6a09e0c2 projects/riscv_usb: Fixup the README 1 jaar geleden

README.md

RISC-V + USB core demo

For the icebreaker, the hardware connections are :

  • P1B4: USB DP
  • P1B3: USB DN
  • P1B2: Pull up. Resistor of 1.5 kOhm to USB DP

To run :

  • Build and flash the bitstream

    • This will build fw/boot.hex and include it as the BRAM initial data

  • Flash the main application code in SPI at offset 1M

    • make -C fw prog

  • Connect to the iCEBreaker uart console (ttyUSB1) with a 1M baudrate

    • and then at the Command> prompt, press c for 'connect'. This will start the USB detection and device should enumerate