Jakub Duchniewicz 254d9836e4 Fix mailbox by introducing intermediate buffer for storing and saving. | il y a 1 semaine | |
---|---|---|
.. | ||
data | il y a 1 semaine | |
fw | il y a 1 semaine | |
rtl | il y a 1 semaine | |
sim | il y a 4 ans | |
Makefile | il y a 2 semaines | |
README.md | il y a 1 an |
For the icebreaker, the hardware connections are :
P1B4
: USB DPP1B3
: USB DNP1B2
: Pull up. Resistor of 1.5 kOhm to USB DPTo run :
Build and flash the bitstream
fw/boot.hex
and include it as the BRAM initial dataFlash the main application code in SPI at offset 1M
make -C fw prog
Connect to the iCEBreaker uart console (ttyUSB1
) with a 1M baudrate
Command>
prompt, press c
for 'connect'. This will
start the USB detection and device should enumerate