Jakub Duchniewicz 762321e7b8 Port most register management code. | 20 godzin temu | |
---|---|---|
.. | ||
data | 1 tydzień temu | |
fw | 20 godzin temu | |
rtl | 21 godzin temu | |
sim | 4 lat temu | |
Makefile | 1 dzień temu | |
README.md | 1 rok temu |
For the icebreaker, the hardware connections are :
P1B4
: USB DPP1B3
: USB DNP1B2
: Pull up. Resistor of 1.5 kOhm to USB DPTo run :
Build and flash the bitstream
fw/boot.hex
and include it as the BRAM initial dataFlash the main application code in SPI at offset 1M
make -C fw prog
Connect to the iCEBreaker uart console (ttyUSB1
) with a 1M baudrate
Command>
prompt, press c
for 'connect'. This will
start the USB detection and device should enumerate