Strona główna Odkrywaj Pomoc
Zarejestruj się Zaloguj się
jduchniewicz
/
doom_riscv
Obserwuj 1
Polub 0
Forkuj 0
Pliki Problemy 0 Oczekujące zmiany 0 Wiki
Drzewo: 888981826f
Gałęzie Tagi
doom_riscv
/
projects
/
riscv_usb
Jakub Duchniewicz 888981826f Transition to riscv_usb as base for out project. 3 tygodni temu
..
data 903ae87b18 projects/riscv_usb: Set clock to their real frequency 4 lat temu
fw 888981826f Transition to riscv_usb as base for out project. 3 tygodni temu
rtl 637d035474 projects: Add no_rw_checks on the soc_bram instances 1 rok temu
sim f560755b26 projects/riscv_usb: Add support for the user button 4 lat temu
Makefile fc12f0de48 projects/riscv_usb: Move the USB stuff to a separate module 4 lat temu
README.md fd6a09e0c2 projects/riscv_usb: Fixup the README 1 rok temu

README.md

RISC-V + USB core demo

For the icebreaker, the hardware connections are :

  • P1B4: USB DP
  • P1B3: USB DN
  • P1B2: Pull up. Resistor of 1.5 kOhm to USB DP

To run :

  • Build and flash the bitstream

    • This will build fw/boot.hex and include it as the BRAM initial data

  • Flash the main application code in SPI at offset 1M

    • make -C fw prog

  • Connect to the iCEBreaker uart console (ttyUSB1) with a 1M baudrate

    • and then at the Command> prompt, press c for 'connect'. This will start the USB detection and device should enumerate