Startseite Erkunden Hilfe
Registrieren Anmelden
jduchniewicz
/
doom_riscv
Beobachten 1
Favorit hinzufügen 0
Fork 0
Dateien Issues 0 Pull-Requests 0 Wiki
Struktur: a1e67cfd04
Branches Tags
doom_riscv
/
projects
/
riscv_usb
Krzysztof Skrzynecki a1e67cfd04 remove USB from deps vor 2 Wochen
..
data bc60e00b90 Port 3signal code and integrate to the top module. vor 3 Wochen
fw a1e67cfd04 remove USB from deps vor 2 Wochen
rtl a1e67cfd04 remove USB from deps vor 2 Wochen
sim f560755b26 projects/riscv_usb: Add support for the user button vor 4 Jahren
Makefile a1e67cfd04 remove USB from deps vor 2 Wochen
README.md fd6a09e0c2 projects/riscv_usb: Fixup the README vor 1 Jahr

README.md

RISC-V + USB core demo

For the icebreaker, the hardware connections are :

  • P1B4: USB DP
  • P1B3: USB DN
  • P1B2: Pull up. Resistor of 1.5 kOhm to USB DP

To run :

  • Build and flash the bitstream

    • This will build fw/boot.hex and include it as the BRAM initial data

  • Flash the main application code in SPI at offset 1M

    • make -C fw prog

  • Connect to the iCEBreaker uart console (ttyUSB1) with a 1M baudrate

    • and then at the Command> prompt, press c for 'connect'. This will start the USB detection and device should enumerate