Sylvain Munaut 637d035474 projects: Add no_rw_checks on the soc_bram instances		преди 1 година
..
data	903ae87b18 projects/riscv_usb: Set clock to their real frequency	преди 4 години
fw	c5c853b4b2 projects: Cleanup some common code between projects	преди 2 години
rtl	637d035474 projects: Add no_rw_checks on the soc_bram instances	преди 1 година
sim	f560755b26 projects/riscv_usb: Add support for the user button	преди 4 години
Makefile	fc12f0de48 projects/riscv_usb: Move the USB stuff to a separate module	преди 4 години
README.md	fd6a09e0c2 projects/riscv_usb: Fixup the README	преди 1 година

RISC-V + USB core demo

For the icebreaker, the hardware connections are :

To run :

Build and flash the bitstream
- This will build fw/boot.hex and include it as the BRAM initial data
Flash the main application code in SPI at offset 1M
- make -C fw prog
Connect to the iCEBreaker uart console (ttyUSB1) with a 1M baudrate
- and then at the Command> prompt, press c for 'connect'. This will start the USB detection and device should enumerate